How To Put Usb Loader Gx On Wii

Usb Loader Gx Wii U Tutorial
How To Install Usb Loader Wii
Usb Gx Loader Wad
How To Put Usb Loader Gx On Wii
How To Put Usb Loader Gx On Wii Menu

Backup Launchers‎ > ‎

cIOS Installation

The cIOS (custom IOS) is a custom piece of software that is used by some applications that work with unofficial content.

By installing it, you can for example use Backup Loaders and install unofficial channels to your Wii menu.

Every cIOS uses an official IOS by Nintendo as its base.

While a cIOS is installed by most people for Backup Loaders, it is also needed by a handful of other applications to work.

There are many applications however that don't need a cIOS.

Most of the Homebrew Applications on Wiibrew only need the Homebrew Channel.

See below

Required

An SD Card (preferably non-SDHC) or USB device
Homebrew Channel installed (must be up to date!)

2 cIOSs will be installed, which can be used by backup loaders and some other apps as well.

If you have no WiFi access on your Wii, follow these additional steps first. Else skip to the guide below.

The WiiU uses another method to get these WADs, so if you are softmodding a WiiU (vWii), you should skip these steps regardless.

Computer ----------------------

1. Start up NUS Downloader. If you don't have it, you can grab it on its page (or direct download link)

2. Make sure that 'Pack WAD' is enabled.

3. Using the database, navigate to the following files and press start NUS Download for each one:

IOS -> IOS56 -> v5661
IOS -> IOS57 -> v5918

4. Open the NUS Downloader directory (the folder where you placed NUS Downloader, you can use extras -> open NUSD directory to open it easily).

You will see a folder named titles. You will find two new folders in this directory:

0000000100000038
0000000100000039

In each folder, there is another folder for the version you just downloaded. Open this version folder and find a WAD file:

0000000100000038 -> 5661 -> IOS56-64-v5661.wad
0000000100000039 -> 5918 -> IOS57-64-v5918.wad

Copy both WAD files to the root of the SD card (or your USB device if you don't have an SD card).

Optionally, if you wish to verify that the downloaded WADs are correct, use a checksum tool (like fciv) to verify:

IOS56

MD5 = 5cdee6593cf0dacc18cf300b12166fde
SHA1 = 597c360e521ccd3062fd9c38c5369e691344d5e2

IOS57

MD5 = ac8bbbea38f29e8d8959badb3badf18e
SHA1 = b8fd4efbb6d7ae2f4e9328b3082901f5981701b1

Guide

Computer ----------------------

1. Start off by downloading the cIOS Installer (make sure to download the correct one):

Inside the zip will be an apps folder. Extract this folder to your SD card (merge with existing apps folder if needed).

Your SD card (or USB) should look like this:

SD
|- IOS56-64-v5661.wad (optionally, for Wii offline guide)
|- IOS57-64-v5918.wad (optionally, for Wii offline guide)
|- /apps
|- /d2x-cios-installer

Wii ----------------------

2. Insert you SD card (or USB) into the Wii.

Now locate the d2x cIOS installer and run it.

3. Wait for the app to load. Read the text on the welcome screen (if it interests you) and press A to continue.

4. You will now see the main configuration screen.

There are many different configurations you can make when installing cIOSs. This guide merely shows our own recommendations, based on the experience of the general community. They should work fine for 99% of all cases.

cIOS 249 base 56 v10 beta52
cIOS 250 base 57 v10 beta52

Your cursor ( > ) will be on the cIOS d2x Version. Change the version to v10 beta52 using the D-PAD (left/right).
Move down, and change the IOS Base to 56.
Move down again, and change the IOS slot to 249.

In some cases it may warn you that the current (c)IOS or IOS STUB will be overwritten. You can ignore this warning.

Move down, and change the cIOS revision to 65535.

This revision is only used by the Wii when checking updates. It is set to the highest version to prevent a system update from overriding it with a non-functional official IOS.
This option does not appear on the WiiU installer.

(note: in the screenshot below; the version is set to beta53-alt; we recommend using beta52 instead)

You are now ready to install, so press A to continue. You will land on an overview with the available cIOS slots.

The slot you just selected should be blinking. Several other slots may be highlighted in red or purple, depending on your console and possible previous softmods.

Wait for the progress to complete. It may take a while, especially for the online installation.

Once it finishes, you will land on another IOS overview screen.

Your freshly installed cIOS should be highlighted in a green color.

On the WiiU version, you will get a simple confirmation message instead.

Press the A button to go back to the configuration screen.

Next, you want to configure the second cIOS. This time, use the following settings:

d2x version: v10 beta52
cIOS base: 57
cIOS slot: 250.
cIOS revision: 65535

Again, press A to install it and wait for the process to finish.

Once everything is installed, press B to exit the application.

You are now able to run any backup loader you want! Enjoy!

We recommend you to use a USB loader.

USB loaders do not require DVD burning and have much better speeds and interfaces.

You just need an up-to-date Homebrew Channel installed, nothing else.

But what about the Trucha Bug Restorer / Dop-Mii / IOS236?

Those are outdated hacks, and using/installing them serves no purpose.

When should I follow the steps under 'Offline NUS Downloads'?

Those steps are for people who are softmodding a regular Wii and don't have WiFi on that console. The steps essentially pre-download some required files which are otherwise downloaded by the console itself. These files can not be included with the installer for legal reasons.

People softmodding a WiiU (vWii) can skip these steps regardless, since the installer will extract them from the console itself.

Can I use other cIOS configurations as the one in this guide?

Yes! As stated above, the configurations of this guide are recommendations based on various tests by the community. They should work for the majority of cases. But you are free to install different cIOSs in different slots. We only recommend to do this if our configurations don't work, though. If you do install your own cIOSs, make sure to select a slot above 200. Also don't use slot 254 (which is BootMii IOS).

What is the IOS base for?

Since building an IOS from scratch is not very easy; the cIOSs that we install merely apply some patches to the existing IOSs provided by Nintendo for the Wii. The IOS base determines what IOS the patches are applied to.

What is the IOS slot for?

The Wii is able to store multiple IOSs on its internal memory, with each IOS occupying its own slot. The slot is merely a number that tells the system where to load the IOS from. For example, IOS56 will be found in IOS slot 56. In order to avoid overriding the default IOSs that are installed on the system, cIOSs (which are custom IOS and thus occupy the same slots), are installed in slots above 200, which are empty or stubs by default.

What is the IOS revision for?

Each IOS has an internal version number. When an update needs to be done to an IOS, the version number is increased. The system, when it detects a newer version for an IOS, will prompt the user to start a system update. The revision of an installed cIOS is thus usually maxed out to prevent the system from overriding it with a non-functional official version.

What is NAND Emulation?

NAND emulation is an optional feature. It allows you to load things like virtual console games from a fake NAND (the internal memory of the console). This fake NAND (often called EmuNAND, Emulated NAND) is stored on the SD card rather than the console itself.

USB Loaders such as USB Loader GX and Wiiflow can create an EmuNAND and use it to launch titles.

What is the 'Current IOS' listed on the bottom of the installer?

This IOS is the one used to run the installer itself (all applications need an IOS to run). It has nothing to do with the cIOSs that are installed.

Do I need to install a cIOS to use Nintendont (GameCube Backup Loader)?

Nope. The cIOS is not used for GameCube backups. It is needed for Wii backups, though, and some USB loaders may need it to run.

This guide will help you install and learn more about USB Loader GX for the softmodded Wii console. This application will work on a 4.3 softmod as well as it will for a 4.2 softmod or a 3.2 softmod. Included in this Wii guide are links to WAD downloads, GX themes, instructions on how to use USB Loader GX, and instructions on how to install GX.

If you need help for anything regarding this tutorial, please join the RiiConnect24 Discord server (recommended) or e-mail us at [email protected].

This is a quick start guide on how to use USB Loader GX, a popular USB loader for the Wii that’s used to play games from a USB drive.

Select the USB Loader GX-UNEOForwarder.wad, click A to install it. After the installation is complete, hit the home button on your Wiimote to boot back into the Wii. Exit the Homebrew Channel. USB Loaders such as USB Loader GX and Wiiflow can create an EmuNAND and use it to launch titles. What is the 'Current IOS' listed on the bottom of the installer? This IOS is the one used to run the installer itself (all applications need an IOS to run). Most of the time you should be fine with using USB Loader 1.6, but you may need to use a different loader depending on what options you want to apply to the channel. Click on “create channel” Your wad will be saved in the WAD directory of your CRAP folder, so you will need to copy/move this wad to your USB hard drive.

What you need

A Wii
A USB drive

Make sure you have installed cIOS before following this!

We recommend you copy games over with Wii Backup Manager if you use Windows, or Witgui if you use macOS.

To play multiple games, we recommend a USB-powered external hard drive for your Wii. We will refer to it as a “USB drive” in this guide. Most of the ones you can find on the market should work fine if they have USB 2 backwards compatibility. Drives with 1 TB or more in capacity will work. A flash drive will also work, but due to the size of a flash drive, it won’t be able to store as many games.

Usb Loader Gx Wii U Tutorial

Make sure your USB drive is formatted as FAT32 or NTFS. Do not format it as other types such as extFS or WBFS, the latter is an old format of storing Wii games.

Instructions

Downloading

Extract USB Loader GX and put it in the apps folder on your USB drive or SD card.
Insert your USB drive, and SD card if you’re using one, into your Wii and launch USB Loader GX from the Homebrew Channel.

Getting Started

There is no “guide” to use the USB Loader GX app. This is intended to help you learn how to use it, by giving you a quick start. You should be able to figure out all the great features of USB Loader GX by using it.

If USB Loader GX says “Waiting for HDD…” with a 20 seconds countdown, it’s likely that it can’t find the USB drive. Try to exit out of the app, and then relaunch it after you put the USB drive in the other port of the Wii.
You can press the 1 Button on your Wii Remote to open up a dialog to download game covers and artwork from GameTDB. It might take a while to download the game covers and artwork, depending on how many games you have.
There are WADs that can open up USB Loader GX if you load it from the Wii Menu. This is called a forwarder WAD. An official forwarder WAD can be found here, and a version for the vWii (Wii U) can be found here.
GameCube or “custom” Wii games may or may not have a custom banner that USB Loader GX uses. To enable this, find or write CustomBannersURL = http://banner.rc24.xyz/ in config/GXGlobal.cfg on your USB drive. Then you can use the “Custom Banner” download by pressing the 1 Button on your Wii Remote.

User Interface

There are multiple buttons in the USB Loader GX interface.

How To Install Usb Loader Wii

Main Menu

These are the functions the buttons found on the top of the main menu do, from left to right:

Star - Shows games that you have marked as “favorites”.
Search - Lets you search for games by name.
Sort - Cycles through sorting methods for games.
Platform - Choose to sort games by platform.
Category - Sorts games by category.
List - Shows games in a list view.
Multi-Cover View - Shows games in a multi-cover view.
Cover Carousel View - Shows games in a carousel view.
Wii Menu View - Shows games in a Wii Menu view.
Parental Control - Locks USB Loader GX.
Disc - Loads a game via disc.

Usb Gx Loader Wad

Pressing any game will allow you to play the game by pressing “Start”.

There are also other buttons:

- Icon - “Install” a game, i.e. loading it from disc and dumping it.
Gears - Settings for USB Loader GX.
SD card - Remount the SD card.
Homebrew - Load homebrew apps.
Wii - Open up the HOME Menu, which can also be accessed by pressing the HOME Button on the Wii Remote.
Power Button - Turn off your Wii.